Whistler PRO-68SE High Performance Radar Detector
- INTELLICORD Ready - Program which features INTELLICORD controls
- One-year warranty
- 3 City Modes and Highway Mode for reducing false alerts; Dim/Dark and Quiet/Auto-Quiet modes
- Detects Laser Atlanta Stealth Mode
- Filter Mode options provide additional signal processing to minimize the occurrences of false alarms
- Enhanced High Performance!
- Blue numeric icon display provides distinct visual confirmation of signals detected, signal strength, and indicates engaged modes of operation
- High-performance unit detects radar and laser signals, POP mode alerts, Safety Warning System alerts, Laser Atlanta stealth mode
- Three (3) Filter Modes Provides extra filtering
- Total Band Protection - selectable
- Format: CD-ROM
- Size: One Size
- Operating System: N/A
4. 15 x 1. 6 ounces. 40 inches and just 5. 90 x 3.
Three Filtering Mode There are times when a radar detector can emit precisely the same frequency as police radar and can result in your detector to falsely alarm. Sometimes a detector can display a signal when picking up another radar detector in vehicle close by. The Whistler Filter Mode options provide extra signal processing to minimize the occurrences of these false alarms. Filter mode supplies standard processing. Filter 1 and Filter 2 modes provide further signal analysis before alarming.
POP Mode Alerts There are new guns out there that operate just like the instant-on guns from the past but with a very tough new twist--POP mode. A detector with no POP Mode detection capability cannot respond to this brief transmission. This one can. When the gun is in POP Mode and activated, a brief burst of energy, much less than 1/15 of a second, is transmitted and the vehicle's speed is swiftly acquired. This new gun is actually a normal K and Ka band radar gun detectable by most radar detectors produced within the past 30 years till it's in POP mode.
3 City Modes/Highway Mode Highway mode provides full audio and visual warning of laser/radar systems while maintaining complete sensitivity. Highway mode is the default setting of all Whistler's laser/radar detectors. When the signal increases the unit will alert briefly to notify you with all of the alter in signal strength. City mode helps lessen the annoyance of automatic door openers and burglar alarm alerts by providing an initial alert (same distance as Highway Mode) then remaining quiet unless the signal strength becomes very strong.
Tone Alerts A distinctly different Alert tone is employed for every single type of signal detected (which includes separate tones for each and each laser signal ). The repeat rate of the tones gives you useful details about the signal detected. For X, K and Ka bandradar signals, the tones will repeat faster as you method the signal source.
Stay Alert The Stay Alert function is created to test a driver's alertness. If a button was not pressed within 3-5 seconds the unit alarms at full volume and the display shows an unique visual alert. If a button is pressed within 3-5 seconds, the cycle is repeated. Within 30 to 60 seconds following the feature is engaged an alert is sounded; to show alertness, the driver must press the volume, city or the mute button inside 3-5 seconds.
Dim/Dark Mode Dim/Dark Mode reduces the illumination from the display. In Dark Mode, the display goes dark for supplied that a signal is becoming detected and for 20 seconds after, then the display returns to the dimmer setting. Dim or dark may be engaged for the duration of an alert.
Vehicle Battery Saver Mode The Vehicle Battery Saver Mode automatically shuts off your detector within 3 hours if you forget to turn it off. The timer is reset if the detector is turned off, unplugged or any button is pressed before the 6 hours have expired. The detector will alert you with an audible and visual warning before it shuts off.
2018 Copyright ©~Radar Detectors